5-50 Chapter 5: Software support
To install the RAID driver in Windows
®
XP:
1. During the OS installation, the system prompts you to press the F6 key to
install third-party SCSI or RAID driver.
2. Press <F6> then insert the oppy disk with RAID driver into the oppy disk
drive.
3. When prompted to select the SCSI adapter to install, make sure you select
SB 600 and Marvell 6121.
4. Follow the succeeding screen instructions to complete the installation.
To install the RAID driver in Windows
®
Vista™:
1. Insert the oppy disk/USB device with RAID driver into the oppy disk drive/USB
port.
2. During the OS installation, select
SB 600 and Marvell 6121.
3. Follow the succeeding screen instructions to complete the installation.
To Next Page
Loading...
