Asus M4N68T PRO - Page 49

ASUS M4N68T PRO 2-11
LoadLine Calibration [Auto]
Sets the LoadLine. Conguration options: [Auto] [Max.100%] [Min.0%]
If the system becomes unstable after changing the setting, set it back to [Auto] for safe
mode.
Memory Clock Mode [Auto]
Sets the memory clock mode. Conguration options: [Auto] [Manual]
DRAM Timing Mode [Auto]
Sets the DRAM timing mode. Conguration options: [Auto] [DCT 0] [DCT 1] [Both]
Memory Over Voltage [Auto]
Sets the memory over voltage. The values range from 1.2000V to 2.4450V with a 0.0150V
increment. Use the <+> / <-> keys to adjust the value. Conguration options: [Auto] [Max. 
2.4450V] [Min.  1.2000V]
Chipset Over Voltage [Auto]
Sets the chipset over voltage. The values range from 1.20000V to 1.60000V with a 0.01000V
increment. Use the <+> / <-> keys to adjust the value. Conguration options: [Auto]
[Max.  1.60000V] [Min.  1.20000V]
The following item only appears when you set Memory Clock Mode to [Manual].
Memclock Value [400MHz]
Selects the DRAM frequency programming method.
Conguration options: [400MHz] [533MHz] [667MHz] [800MHz]