To enable HybridPower
1. Follow Step 1 to 5 on the previous page to complete the hardware and driver
installation.
2. If the driver is correctly installed, you will nd the
Hybrid SLI icon on the taskbar.
The Hybrid SLI icon indicates that the system is in Performance mode and that
rendering is being done by the dGPU. The mGPU is being used only to drive the
display.
3. Click the Hybrid SLI icon and select
Save Power.
4. The icon will change state (from
to ) to indicate
that the system is in Power Saving mode, which
means that the dGPU is turned off and the mGPU is
both rendering and displaying.
5. When the Power Saving mode is enabled, the dGPU does not show in the Windows
®
Device Manager.
Power Saving mode is disabled. When the Power Saving mode is enabled, the
dGPU is turned off and does not appear in the
Device Manager.
1-38 ASUS M4N75TD
To Next Page
Loading...
