Asus M5A78L USB3 - Page 51

ASUS M5A78L/USB3 2-11
CPU Ratio [Auto]
Sets the CPU ratio. Conguration options: [Auto] [x4.0 800MHz] [x4.5 900MHz] [x5.0
1000MHz] [x5.5 1100MHz] ~ [x13.0 2600MHz] [x13.5 2700MHz] [x14.0 2800MHz] [x14.5
2900MHz] [x15.0 3000MHz]
CPU/NB Frequency [Auto]
Sets the CPU/Northbridge frequency. Conguration options: [Auto] [800MHz] [1000MHz]
[1200MHz] [1400MHz] [1600MHz] [1800MHz] [2000MHz]
CPU Over Voltage [Auto]
Sets the CPU over voltage. The valid value ranges vary depending on your CPU model. Use
<+> / <-> keys to adjust the ratio. Conguration options: [Auto]
VDDNB Over Voltage [Auto]
Sets the VDDNB over voltage. The valid value ranges vary depending on your CPU model.
Use <+> / <-> keys to adjust the ratio. Conguration options: [Auto]
LoadLine Calibration [Auto]
Sets the LoadLine. Conguration options: [Auto] [Max.=100%] [Min.=0%]
If the system becomes unstable after changing the setting, set it back to [Auto] for safe
mode.
HT Link Speed [Auto]
Sets the HyperTransport link speed. Conguration options: [Auto] [200MHz] [400MHz]
[600MHz] [800MHZ] [1000MHz] [1600MHz] [1800MHz] [2000MHz]
HT Over Voltage [Auto]
Sets the HT over voltage. The values range from 1.20000V to 1.38000V with a 0.01000V
increment. Use the <+> / <-> keys to adjust the value. Conguration options: [Auto]
[Max. = 1.38000V] [Min. = 1.20000V]
DRAM Timing Cong [Auto]
Conguration options: [Auto] [Manual]
The following item only appears when you set DRAM Timing Cong to [Manual].
Memory Clock Speed [400MHz]
Selects the memory clock frequency programming method.
Conguration options: [400MHz] [533MHz] [667MHz] [800MHz]
PCIE Overclocking [Auto]
Congures the PCIE overclocking. Conguration options: [Auto] [Manual]
The following item only appears when you set PCIE Overclocking to [Manual].
PCIE Clock [100]
Sets the PCIE Clock. Conguration options: [Min.=100] [Max.=150]