Asus M5A78L USB3 - Chipset

2-14 Chapter 2: BIOS information
2.4.3 Chipset
NorthBridge Conguration
DRAM Controller Conguration
Bank Interleaving [Auto]
Allows you to enable the bank memory interleaving. Conguration options: [Disabled] [Auto]
Node Interleaving [Disabled]
Allows you to enable the node memory interleaving. Conguration options: [Disabled] [Auto]
Channel Interleaving [Auto]
Allows you to enable the channel memory interleaving. Conguration options: [Disabled] [Auto]
Memory Hole Remapping [Enabled]
Allows you to enable or disable memory remapping around memory hole.
Conguration options: [Disabled] [Enabled]
Power Down Enable [Auto]
Allows you to enable or disable DDR power down mode.
Conguration options: [Auto] [Disabled] [Enabled]
ECC Conguration
ECC Mode [Disabled]
Enables or disables the DRAM ECC that allows the hardware to report and correct memory errors
automatically. Conguration options: [Disabled] [Basic] [Good] [Super] [Max] [User]
Internal Graphics
Primary Video Controller [GFX0-GPP-PCI]
Selects the primary display adapter. Conguration options: [GFX0-GPP-PCI] [GPP-GFX0-
PCI] [PCI-GFX0-GPP]
GFX0: primary video controller on a PCIe x16 slot
GPP: primary video controller on a PCIe x1 slot
PCI: primary video controller on a PCI slot
Hybrid Crossre [Disabled]
Enables or disables the Hybird Crossre function. Conguration options: [Enabled [Disabled]
Value (All Cores) [-2%]
This item only appears when you set Advanced Clock Calibration to [All Cores]. It
allows you to set the overclocking percentage for all the processor cores as a whole.
Conguration options: [0%] [+2%] [+4%] [+6%] [+8%] [+10%] [+12%] [-2%] [-4%]
[-6%] [-8%] [-10%] [-12%]
Value (Core 0) / (Core 1) / (Core 2) / (Core 3) [-2%]
These items only appear when you set Advanced Clock Calibration to [Per Core]
and allow you to set the overclocking percentage for each process core separately.
Conguration options: [0%] [+2%] [+4%] [+6%] [+8%] [+10%] [+12%] [-2%] [-4%]
[-6%] [-8%] [-10%] [-12%]