• The TPU LED (02LED2) near the TPU switch lights when the switch setting is turned to
Enable.
• If you clear the CMOS or load the BIOS setup defaults, the related overclocking items in
the BIOS menu follow the current setting of the TPU switch.
• If you change the switch setting to
Enable under the OS environment, the TPU function
will be activated after the next system bootup.
• You may use the TurboV and Auto Tuning features in the TurboV EVO application, adjust
the BIOS settings, or enable the TPU function at the same time. However, the system will
use the last setting you have made.
3. Core_Unlocker switch
This switch allows you to enable or disable the Core_Unlocker function.
To Next Page
Loading...
