Asus MAXIMUS VII IMPACT - Page 142

3-56
Chapter 3: BIOS setup
Chapter 3
Chassis Fan 1-3 Q-Fan Control [Enabled]
These items allow you to enable or disable the chassis fans’ Q-Fan control feature of your
motherboard.
Conguration options: [Disabled] [Enabled]
Chassis Fan 1-3 Speed Low Limit [300 RPM]
This item allows you to disable or set the chassis fan warning speed.
Conguration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]
Chassis Fan 1-3 Profile [Standard]
This item allows you to set the appropriate performance level of the chassis fan.
[Standard] Set to make the chassis fan adjust automatically depending on the
chassis temperature.
[Silent] Set to minimize the fan speed for quiet chassis fan operation.
[Turbo] Set to achieve maximum chassis fan speed.
[Manual] Set to assign detailed fan speed control parameters.
The following items appear only when you set the Chassis Fan Prole to [Manual].
Chassis Fan 1-3 Upper Temperature [70]
Use the <+> or <-> keys to adjust the upper limit of the CPU temperature.
The values range from 40°C to 90°C.
Chassis Fan 1-3 Max. Duty Cycle(%) [100]
Use the <+> or <-> keys to adjust the maximum chassis fan duty cycle. The
values may differ via Qfan tuning.
Chassis Fan 1-3 Middle Temperature [45]
Use the <+> or <-> keys to set the value for Chassis Fan Middle
Temperature.
Chassis Fan 1-3 Middle Duty Cycle(%) [60]
Use the <+> or <-> keys to adjust the chassis fan middle duty cycle. The
values may differ via Qfan tuning.
Chassis Fan 1-3 Lower Temperature [40]
Use the <+> or <-> keys to adjust the chassis fans’ lower temperature. The
values may differ via Qfan tuning.
Chassis Fan 1-3 Min. Duty Cycle(%) [60]
Use the <+> or <-> keys to adjust the minimum chassis fan duty cycle. The
values may differ via Qfan tuning.