Asus maximus viii formula - PCH Storage Configuration

3-30
Chapter 3: BIOS Setup
Chapter 3
SATA Controller(s) [Enabled]
This item allows you to enable or disable the SATA Device.
Conguration options: [Disabled] [Enabled]
SATA Mode Selection [AHCI]
This item allows you to set the SATA conguration.
[AHCI] Set to [AHCI] when you want the SATA hard disk drives to use the AHCI
(Advanced Host Controller Interface). The AHCI allows the onboard storage
driver to enable advanced Serial ATA features that increases storage
performance on random workloads by allowing the drive to internally
optimize the order of commands.
[RAID] Set to [RAID] when you want to create a RAID conguration from the SATA
hard disk drives.
The following item appears only when you set the SATA Mode Selection to [RAID].
M.2/U.2 PCIE Storage RAID Support [Disabled]
This item allows you to enable or disable PCIE port to SATA for RAID Remapping.
Conguration options: [Disabled] [Enabled]
3.6.6 PCH Storage Configuration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The
SATA Port items show Empty if no SATA device is installed to the corresponding SATA port.
Scroll down to display the other BIOS items.