Asus MG248QR - Sound and Input

3-4
Chapter 3: General Instructions
 : Turns on/off the ASCR (ASUS Smart Contrast Ratio) function.
 (DisplayPort only)
: Allows an Adaptive-Sync supported*
graphics source to dynamically adjust display refresh rate based on
typical content frame rates for power efcient, virtually stutter free and
low-latency display update.
To activate Adaptive-Sync, turn off ELMB function first.
* Adaptive-Sync can only be activated within 40Hz ~ 144Hz.
* For supported GPUs, minimum PC system and driver requirements,
please contact the GPU manufactures.
 : Turns on/off the ELMB (Extreme Low Motion Blur) function. This
function is available when the refresh rate is 85Hz, 100Hz or 120Hz.
To activate ELMB, turn off Adaptive-Sync function first.
 
Set the sound related setting from this menu.
Volume
Mute
Source
Sound
ASU S MG2 4 8
Rac i ngMo d e HD M I 1 0 80p 6 0Hz
 : the adjusting range is from 0 to 100.
 : toggles the monitor sound between on and off.
 : decides the monitor sound comes from which source.
 
In this function, you can select your desired input source.
DVI
HDMI
DisplayPo r t
Input Select
ASU S MG2 4 8
Rac i ngMo d e HD M I 1 0 80p 6 0Hz