Asus P10S-I - Page 36

2-20
Chapter 2: Hardware Information
3. CATT ERR LED (CATTERR1)
 TheCATTERRLEDindicatesthatthesystemhasexperiencedafatalorcatastrophic
error and cannot continue to operate.
4. Baseboard Management Controller LED (BMCLED1)
 ThegreenheartbeatLEDblinkspersecondtoindicatethattheASMB8isworking
normally.TheBMCLEDworkswiththeASUSASMB8managementdeviceand
indicatesitsinitiationstatus.WhenthePSUispluggedandthesystemisOFF,ASUS
ASMB8managementdevicestartssysteminitiationforaboutone(1)minute.TheBMC
LEDblinksaftersysteminitiationnishes.
• TheheartbeatLEDfunctionsonlywhenyouinstalltheASUSASMB8Management
card.
• EverytimeaftertheACpowerisrepluggedyouhavetowaitforabout60secondsfor
the system to power on.