Asus P10S-I - Onboard Leds

ASUS P10S-I
2-19
2.6 Onboard LEDs
1. Standby Power LED (SBPWR1)
 ThemotherboardcomeswithastandbypowerLED.ThegreenLEDlightsupto
indicatethatthesystemisON,insleepmode,orinsoft-offmode.Thisisareminder
thatyoushouldshutdownthesystemandunplugthepowercablebeforeremovingor
plugging in any motherboard component. The illustration below shows the location of
theonboardLED.
2. Location LED (LOCLED1)
 TheLocationLEDisanonboardLEDthatlightsupwhentheLocationButtononthefront
panelis pressed. ThisLED helps youvisually locate theserver among otherservers
especiallywhenyouarelocatedatthebackoftheserverrack.