Asus P10S-I - Page 39

ASUS P10S-I
2-23
2. VGA controller setting (3-pin VGA_SW1)
ThisjumperallowsyoutoenableordisabletheonboardVGAcontroller.Settopins1–2
toactivatetheVGAfeature.
3. LAN controller setting (3-pin LAN_SW1, LAN_SW2)
ThesejumpersallowsyoutoenableordisabletheonboardIntel
®
I210GigabitLAN
controllers.Settopins1-2toactivatetheGigabitLANfeature.