Asus P10S-X - Page 94

4-38
Chapter 4: BIOS Setup
User Password
To set a user password:
1. Select the User Password item and press <Enter>.
2. FromtheCreateNewPasswordbox,keyinapassword,thenpress<Enter>.
3. Conrmthepasswordwhenprompted.
To change a user password:
1. Select the User Password item and press <Enter>.
2. FromtheEnterCurrentPasswordbox,keyinthecurrentpassword,thenpress
<Enter>.
3. FromtheCreateNewPasswordbox,keyinanewpassword,thenpress<Enter>.
4. Conrmthepasswordwhenprompted.
Secure Boot Control [Disabled]
ThisitemallowsyoutoenableordisabletheSecureBootowcontrol.
Congurationoptions:[Disabled][Enabled]
Secure Boot Mode [Custom]
This item allows you to select the mode of the Secure boot to change Execution policy and
Secure Boot Key management.
Congurationoptions:[Standard][Custom]
Secure Boot Menu
This item allows you to customize the Secure Boot settings.