4-30
Chapter 4: BIOS Setup
DMI Link ASPM Control [Auto]
AllowsyoutoenableordisablecontrolofactivestatepowermanagementofDMIlink.
Congurationoptions:[Disabled][L0s][L1][L0sL1][Auto]
Port8xh Decode [Disabled]
Allows you to enable or PCI express port 8xh decode.
Congurationoptions:[Disabled][Enabled]
The following item appears only when you set
Port8xh Decode
to
[Enabled]
.
Port8xh Decode Port# [0]
Select PCI Express Port8xh Decode Root Port. User to ensure port
availability.
Congurationoptions:[0]-[23]
SATA And RSTe Configuration
SATA Controller(s) [Enabled]
Allows you to enable or disable the SATA Controller.
Congurationoptions:[Disabled][Enabled]
The following items appear only when you set
SATA Controller(s)
to
[Enabled]
.
SATA Mode Selection [AHCI]
Allows you to select the SATA controllers operation.
Congurationoptions:[AHCI][RAID]
Serial ATA Port 1-6
Port 1-6 [Enabled]
Allows you to enable or disable the SATA port.
Congurationoptions:[Disabled][Enabled]
Hot Plug [Enabled]
Allows you to enable or disable this port as hot pluggable.
Congurationoptions:[Disabled][Enabled]
Spin Up Device [Disabled]
Allows you to enable or disable Spin Up Device.
Congurationoptions:[Disabled][Enabled]
SATA Device Type [Hard Disk Drive]
AllowsyoutoidentifytheSATAportisconnectedtoasolidstatedriveoraharddisk
drive
Congurationoptions:[HardDiskDrive][SolidStateDrive]