Asus P2E - Safety Precautions; Using Your LED Projector; Servicing and Replacement of Parts

LED projector E-Manual
7
Safety precautions
Using your LED projector
• Refer to the manual and take note of the safety instructions
before operating your LED projector.
• Follow the notes and warnings stated in the user manual.
• Do not place your LED projector on uneven or unstable surfaces.
• Do not use your LED projector in smoky environments. Smoke
residue may cause build-up on critical parts and damage the
LED projector or decrease its performance.
• Keep the LED projector’s plastic packages out of the reach of
children.
• Do not block or place anything near the LED projector’s
ventilation holes. Doing so may cause internal heat build-up
that can degrade picture quality and damage the projector.
• Ensure that the operating voltage of your LED projector
matches the voltage of your power source.
Servicing and replacement of parts
• Do not disassemble or attempt to service this LED projector by
yourself. Contact your local ASUS service center for assistance.
• Risk of explosion if battery is replaced by an incorrect type.
Dispose used batteries according to safety instructions and
contact your local ASUS service center for assistance.
• When replacing parts of your LED projector, purchase items
as specied by ASUS and contact your local service center for
assistance.