2-4
Chapter 2: Hardware information
2.4.1 Overview
The motherboard comes with a surface mount 478-pin Zero Insertion
Force (ZIF) socket. The socket is designed for the Intel
®
Pentium
®
4
Processor in the 478-pin package with 512KB L2 cache on 0.13 micron
process. This processor includes the Intel
®
NetBurst™ micro-architecture
that features the rapid execution engine, Intel
®
Hyper-Threading
Technology, 800/533/400MHz system bus, and execution trace cache.
Together, these attributes improve system performance by allowing higher
core frequencies, faster execution of integer instructions, and data transfer
rates of 6.4GB/s, 4.2GB/s and 3.2GB/s.
Note in the illustration that the CPU
has a gold triangular mark on one
corner. This mark indicates the
processor Pin 1 that should match a
specific corner of the CPU socket.
Gold Mark
2.4 Central Processing Unit (CPU)
Notes on Intel
®
Hyper-Threading Technology
To use the Hyper-Threading Technology on this motherboard:
1. Buy an Intel Pentium 4 CPU that supports Hyper-Threading
Technology. Install the CPU.
2. Power up the system and enter BIOS Setup (see Chapter 2). Under
the Advanced Menu, make sure that the item CPU Configuration->
Hyper-Threading Technology is set to Enabled. The item appears
only if you installed a CPU that supports Hyper-Threading Technology.
3. Reboot the computer.
1. This motherboard supports Intel Pentium 4 CPUs with Hyper-
Threading Technology.
2. Hyper-Threading Technology is supported under Windows XP and
Linux 2.4.x (kernel) and later versions only. Under Linux, use the
Hyper-Threading compliler to compile the code. If you are using any
other operating systems, disable the Hyper-Threading Techonology
item in BIOS to ensure system stability and performance.
3. It is recommended that you install WinXP Service Pack 1.
4. Make sure to enable the Hyper-Threading Technology item in BIOS
before installing a supported operating system.
5. For more information on Hyper-Threading Technology, visit
www.intel.com/info/hyperthreading.
To Next Page
Loading...
