3-6
Chapter 3: Software support
3.3.2 SIS RAID configurations
The motherboard includes a high performance Serial ATA RAID controller
integrated in the SIS 964 southbridge chipset. It supports RAID 0 and RAID 1 with
two independent Serial ATA channels.
Entering the SIS RAID BIOS utility
1. Boot your computer.
2. During POST, press <Ctrl> + <S> to enter the SIS RAID configuration utility.
The following menu options appear.
3. Press <R> to display the RAID setup menu.
Create an Array
1. From the SIS RAID BIOS utility main menu, press <A> to create an array.
To Next Page
Loading...
