3-12
Chapter 3: Software support
3.4.3 SIS 180 RAID utility operation
1. After installing the SIS RAID utility, go to Start -> Programs-> SIS RAID
Utility and click on the SiSRaid item to display the SIS RAID Utility window.
2. The SIS RAID utility main interface has two tabs: View and Configuration.
Click on each tab to view its contents. The View tab contains the device
information. The default value displayed is the information of the first device
detected.
3. Click the Configuration tab to display its contents. The Configuration tab
contains a subset of tabs: Create Raid, Delete Raid and Raid Recovery. You
can switch to the different tabs by clicking on it.
To Next Page
Loading...
