Asus P5KPL IPC SI - Onboard Devices Configuration; PCI Pnp

ASUS P5KPL IPC/SI 2-9
The [Maximum DVMT] option only appears when installing 1GB DDR2 DIMMs into the
DIMM sockets.
PEG Force x 1
Allows you to enable or disable the PEG Force x 1. Conguration options: [Disabled]
[Enabled]
Video Function Conguration
DVMT Mode Select [DVMT Mode]
Allows you to select the DVMT mode. Conguration options: [Fixed Mode] [DVMT
Mode]
DVMT/FIXED Memory [256MB]
Allows you to select the DVMT/FIXED memory. Conguration options: [128MB]
[256MB] [Maximum DVMT]
South Bridge Conguration
Audio Controller [Azalia]
Allows you to set the audio controller. Conguration options: [Azalia] [Disabled]
Front Panel Support Type [HD Audio]
Allows you to select the front panel support type. If High Denition Audio Front Panel
used, set this item to [HD Audio] mode. Conguration options: [AC97] [HD Audio]
2.4.4 Onboard Devices Conguration
Onboard LAN [Enabled]
Allows you to enable or disable the onboard LAN controller.
Conguration options: [Enabled] [Disabled]
OnBoard LAN Boot ROM [Disabled]
Allows you to enable or disable the boot ROM in the onboard LAN controller. This item
appears only when the Onboard LAN item is set to Enabled. Conguration options:
[Disabled] [Enabled]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Conguration options: [Disabled] [3F8/IRQ4] [3E8/IRQ4] [2E8/IRQ3]
Serial Port2 Address [3F8/IRQ4]
Allows you to select the Serial Port2 base address.
Conguration options: [Disabled] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Take caution when changing the settings of the PCI PnP menu items. Incorrect eld values
can cause the system to malfunction.
2.4.5 PCI PnP
The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices.
The menu includes setting IRQ and DMA channel resources for either PCI/PnP or legacy ISA
devices, and setting the memory size block for legacy ISA devices.