4-18 Chapter 4: Software support
Chapter 4
To install the RAID driver in Windows
®
XP:
1. During the OS installation, the system prompts you to press the F6 key to install
third-party SCSI or RAID driver.
2. Press <F6>, and then insert the oppy disk with RAID driver into the USB oppy disk
drive.
3. When prompted to select the SCSI adapter to install, ensure that you select
Intel(R)
SATA RAID Controller (Desktop ICH10R).
4. Follow the succeeding screen instructions to complete the installation.
To install the RAID driver in Windows
®
Vista™:
1. Insert the oppy disk/USB device with RAID driver into the USB oppy disk drive/USB
port.
2. During the OS installation, select
Intel(R) SATA RAID Controller (Desktop ICH10R).
3. Follow the succeeding screen instructions to complete the installation.
To Next Page
Loading...
