Asus P5Q Turbo - Motherboard - ATX - Page 54

2-36 Chapter 2: Hardware information
Chapter 2
12. Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel
audio I/O module cable to this connector.
• We recommend that you connect a high-denition front panel audio module to this
connector to avail of the motherboard’s high-denition audio capability.
• If you want to connect a high-denition front panel audio module to this connector, set
the
Front Panel Type
item in the BIOS setup to
[HD Audio];
if you want to connect an
AC'97 front panel audio module to this connector, set the item to
[AC97]
. By default,
this connector is set to
[HD Audio]
.