Asus P5SD1-FM2 - Onboard Devices Configuration

ASUS P5SD1-FM2 2-19
2.4.3 Onboard Devices Configuration
Configure ITE8712 Super IO Chipset
Serial Port1 Address [3F8/IRQ4]
Serial Port1 Mode [Normal]
Parallel Port Address [378]
Parallel Port Mode [ECP]
ECP Mode DMA Channel [DMA3]
Parallel Port IRQ [IRQ7]
Onboard 1394 Controller [Enabled]
Allows BIOS to enable
or disable the floppy
controller.
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [3E8/IRQ4] [2E8/IRQ3]
Serial Port1 Mode [Normal]
Allows you to select the Serial Port1 mode.
Configuration options: [Normal] [IrDA] [ASK IR]
COMA Duplex Mode [Half Duplex]
Allows the BIOS to select Full or Half Duplex for Serial Port. This
appears only when the Serial Port1 Mode item is set to [IrDA] or
[ASK IR] Configuration options: [Full Duplex] [Half Duplex]
Parallel Port Address [378]
Allows you to select the Parallel Port base addresses.
Configuration options: [Disabled] [378] [278]
Parallel Port Mode [ECP]
Allows you to select the Parallel Port mode.
Configuration options: [Normal] [EPP] [ECP] [EPP+ECP]
EPP Version [1.9]
Allows selection of the Parallel Port EPP version. This item appears
only when the Parallel Port Mode is set to [EPP] or [EPP+ECP].
Configuration options: [1.9] [1.7]
ECP Mode DMA Channel [DMA3]
Allows you to set the Parallel Port ECP DMA. This item appears only
when the Parallel Port Mode is set to [ECP] or [EPP+ECP].
Configuration options: [DMA0] [DMA1] [DMA3]
Parallel Port IRQ [IRQ7]
Allows selection of the Parallel Port IRQ.
Configuration options: [IRQ5] [IRQ7]
This Manual: http://www.manuallib.com/file/2595652