4-48 Chapter 4: Software support
4.5.3 Installing the RAID driver during Windows
®
OS
installation
To install the RAID driver in Windows
®
XP:
1. During the OS installation, the system prompts you to press the F6 key to
install
third-party SCSI or RAID driver.
2. Press <F6>, and then insert the oppy disk with RAID driver into the USB
oppy disk drive.
3. When prompted to select the SCSI adapter to install, ensure that you select
Intel(R) SATA RAID Controller (Desktop ICH10R).
4. Follow the succeeding screen instructions to complete the installation.
To install the RAID driver in Windows
®
Vista™:
1. Insert the oppy disk/USB device with RAID driver into the USB oppy disk
drive/USB port.
2. During the OS installation, select Intel(R) SATA RAID Controller (Desktop
ICH10R).
3. Follow the succeeding screen instructions to complete the installation.
To Next Page
Loading...
