Asus P7H55-M LX USB3 - Boot Menu Settings; Boot Device Priority; Boot Settings Configuration

ASUS P7H55-M LX/USB3 2-17
CPU/Chassis Q-Fan Function [Enabled]
Allows you to enable or disable the CPU/Chassis Q-Fan function.
Conguration options: [Disabled] [Enabled]
CPU Q-Fan Mode [Optimal]
Allows you to select Chassis Q-Fan mode.
Conguration options: [Performance] [Optimal] [Silent]
2.6.1 Boot Device Priority
1st ~ xxth Boot Device
These items specify the boot device priority sequence from the available devices. The
number of device items that appears on the screen depends on the number of devices
installed in the system. Conguration options: [Removable Dev.] [Hard Drive] [ATAPI CD-
ROM] [Disabled]
2.6 Boot menu
The Boot menu items allow you to change the system boot options. Select an item then
press <Enter> to display the sub-menu.
Boot Settings
Boot Device Priority
Boot Settings Conguration
Security
Species the Boot
Device Priority
sequence.
A virtual oppy disk
drive (Floppy Drive B:)
may appear when you set
the CD-ROM drive as the
rst boot device.
P7H55-M LX/USB3 BIOS Setup Version 0205
Main Advanced Power Boot Tools Exit
Set this item to [Enabled] to use the ASUS MyLogo2
™
feature.
2.6.2 Boot Settings Conguration
Quick Boot [Enabled]
Enabling this item allows the BIOS to skip some power on self tests (POST) while booting to
decrease the time needed to boot the system. When set to [Disabled], BIOS performs all the
POST items. Conguration options: [Disabled] [Enabled]
Full Screen Logo [Enabled]
This allows you to enable or disable the full screen logo display feature. Conguration
options: [Disabled] [Enabled]
• To select the boot device suring system startup, press <F8> when ASUS Logo appears.
• To access Windows
®
OS in Safe Mode, do any of the following:
• Press <F5> when ASUS Logo appears.
• Press <F8> after POST.