Do you have a question about the Asus P8H77-M PRO and is the answer not in the manual?
ECC | No |
---|---|
Non-ECC | Yes |
Memory voltage | 1.5 V |
Memory channels | Dual-channel |
Memory slots type | DIMM |
Number of memory slots | 4 |
Supported memory types | DDR3-SDRAM |
Maximum internal memory | 32 GB |
Supported memory clock speeds | 1066, 1333, 1600, 1800, 1866, 2000, 2133, 2200 MHz |
Supported memory module capacities | 16GB, 1GB, 2GB, 4GB, 8GB |
System bus rate | 5 GT/s |
Processor socket | LGA 1155 (Socket H2) |
Processor manufacturer | Intel |
Compatible processor series | Intel Core i3, Intel Core i5, Intel Core i7 |
Maximum number of SMP processors | 1 |
USB 2.0 connectors | 3 |
Number of Parallel ATA connectors | 0 |
Headphone outputs | 6 |
USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
Audio chip | Realtek ALC892 |
Cooling type | Passive |
Component for | PC |
Power source type | ATX |
Motherboard chipset | Intel H77 |
PC health monitoring | CPU, FAN, Temperature |
Audio output channels | 7.1 channels |
Motherboard form factor | micro ATX |
RAID levels | 0, 1, 5, 10 |
Supported storage drive interfaces | SATA II, SATA III |
Cables included | SATA |
Graphics card | HD Graphics |
OpenGL version | 3.2 |
DirectX version | 11 |
Maximum resolution | 2560 x 1600 pixels |
Maximum graphics card memory | 1696 MB |
Parallel processing technology support | 2-Way CrossFireX, LucidLogix Virtu, Quad-GPU CrossFireX |
PCI Express slots version | 2.0, 3.0 |
PCI Express configurations | 1x4, 1x16 |
Controller 2nd interface type | Marvell PCIe SATA |
LAN controller | Realtek RTL8111F |
Wi-Fi standards | Not supported |
Networking features | Gigabit LAN |
Ethernet interface type | Gigabit Ethernet |
BIOS type | UEFI |
ACPI version | 2.0a |
BIOS memory size | 64 Mbit |
Width | 245 mm |
---|
Precautions to prevent electrical shock hazards during system operation and relocation.
Guidelines for safe handling and operation of motherboard components.
Details Precision Tweaker 2, SFS, and Overclocking Protection for performance tuning.
Lists precautions for handling components and preventing static discharge.
Details the LGA1155 socket and provides CPU installation guidelines.
Explains the function of onboard switches like MemOK!, EPU, and GPU Boost.
Provides step-by-step instructions for installing the CPU.
Provides instructions for installing the CPU heatsink and fan.
Provides step-by-step instructions for installing and removing DIMMs.
Provides instructions for installing the motherboard into the PC chassis.
Illustrates how to connect the ATX power supply to the motherboard.
Guides through the initial system power-on and POST checks.
Allows configuration of overclocking-related items for performance tuning.
Shows CPU-related information automatically detected by the BIOS.
Configures SATA devices, modes (IDE, AHCI, RAID), and hot plug support.
Configures system agent settings and graphics options.
Configures USB features like legacy support and xHCI mode.
Enables or disables onboard devices like HD Audio and LAN.
Provides information on updating the motherboard BIOS.
An all-in-one interface for ASUS utilities like Auto Tuning and DIGI+ VRM.
Allows manual adjustment of CPU frequency, voltage, and GPU Boost.
An energy-efficient tool to save system power by optimizing settings.
Adjusts CPU and chassis fan speeds for quiet operation and cooling.
Provides speed boost for USB 3.0 devices with UASP support.