Asus P9D-M Series - Setting the Boot Array in the BIOS Setup Utility

5-12
Chapter 5: RAID conguration
5.2.6 Setting the Boot array in the BIOS Setup Utility
You can set the boot priority sequence in the BIOS for your RAID arrays when setting up
multi-RAID using the Intel
®
Rapid Storage Technology enterprise Option ROM utililty.
To set the boot array in the BIOS:
Set at least one of the arrays bootable to boot from the hard disk.
1. Reboot the system and press <Del> to enter the BIOS setup utility during POST.
2. Go to the
Boot menu and select the boot option priority.
3. Use up/down arrow keys to select the boot priority and press <Enter>. See the
Boot
menu section of Chapter 4 for more details.
4. From the
Exit menu, select Save Changes & Exit, then press <Enter>.
5. When the conrmation window appears, select
Yes, then press <Enter>.