Asus P9D-M Series - Connecting the Thermal Sensor Cable

ASUS P9D-M Series
2-21
2.5.6 Connecting the Thermal sensor cable
Follow the steps below to connect the Thermal sensor (TR1) cable to the connector
on your motherboard.
1. Locate the Thermal Sensor
connector on the motherboard.
2. Connect the Thermal Sensor cable
to the connector.
3. Place the other end of the Thermal Sensor cable to the device you would like
to monitor temperature.
The motherboard illustration is for reference only. The motherboard layout and appearance
may vary depending on the model, but the installation steps remain the same.