6-6 Chapter 6: Driver installation
4. A message appears reminding you to insert the installation media containing the driver
of the RAID controller driver. If you have only one optical drive installed in your system,
eject the Windows OS installation disc and replace with the motherboard Support DVD
in the optical drive. Click Browse to continue.
5. Locate the driver in the corresponding folder of the Support DVD, and then click
OK to
continue.
6. Select the RAID controller driver you need from the list and click
Next.
7. When the system nishes loading the RAID driver, replace the motherboard Support DVD
with the Windows Server installation disc. Select the drive to install Windows and click
Next.
8. Follow succeeding screen instructions to continue.
To Next Page
Loading...
