Asus PA328CGV Series - Detaching the arm;stand (for VESA wall mount)

2-2
Chapter 2: Setup
2.2 Detaching the arm/stand (for VESA wall
mount)
ThedetachablestandofthismonitorisspeciallydesignedforVESAwall
mount.
To detach the arm/stand
1. Disconnect power and signal cables. Carefully put the monitor
facedownonitsEPSpackaging.
2. Press the quick release button from rear cover.
3. Detachthestand(armandbase)fromthemonitor.
• TheVESAwallmountkit(100x100mm)ispurchasedseparately.
• UseonlytheULListedWallMountBracketwithminimumweight/load28.8 kg
(Screwsize:M4x10mm).