Asus PG348 - Back View

1-3ASUS PG348Q Series LCD Monitor
• Turns on the OSD menu when the monitor enters standby mode or
displays the “NO SIGNAL“ message.
5.
Power button/power indicator
• Turns the monitor on/off.
• The color definition of the power indicator is as the below table.
Status Description
White ON
Amber ashing Entering standby mode
Amber Standby mode/No signal
OFF OFF
Red G-SYNC
1.3.2 Backview
9
8
1. Kensingtonlockslot.
2. DisplayPort.This port is for connection for a DisplayPort compatible device.
3. HDMIport. This port is for connection with an HDMI compatible device.
4. USB3.0upstreamport. This port is for connection with a USB upstream
cable. The connection enables the USB ports on the monitor.
5. USB3.0downstreamports. These ports are for connection with USB
devices, such as USB keyboard/mouse, USB flash drive, etc.
6. For service personnel only.
7. Earphonejack. This port is only available when an HDMI/DisplayPort cable
is connected.
8. DC-INport. This port connects the power cord.
9. Controlbuttons.