Asus PG348 - OSD (On-Screen Display) Menu; How to Reconfigure; Over Clocking

3-1ASUS PG348Q Series LCD Monitor
3.1 OSD (On-Screen Display) menu
 
MOVE/ENTER
BACK
EXIT
On Over Clocking
GameVisual
Blue Light Filter
Color
Image
Input Select
System Setup
Normal Mode DisplayPort 3440 x 1440@ 60Hz
Racing Mode
ASUS ROG PG348
1. Press the ( ) button to activate the OSD menu.
2. Move the ( ) button up/down to navigate through the functions.
Highlight the desired function and press the ( ) button to activate it. If
the function selected has a sub-menu, move the ( ) button up/down
again to navigate through the sub-menu functions. Highlight the desired sub-
menu function and press the ( ) button or move the ( ) button
right to activate it.
3. Move the ( ) button up/down to change the settings of the selected
function.
4. To exit and save the OSD menu, press the button or move the
( ) left repeatedly until the OSD menu disappears. To adjust other
functions, repeat steps 1-3.
 
 
This function allows you to adjust the refresh rate.
MOVE/ENTER
BACK
EXIT
On Over Clocking
GameVisual
Blue Light Filter
Color
Image
Input Select
System Setup
Normal Mode DisplayPort 3440 x 1440@ 60Hz
Racing Mode
ASUS ROG PG348
• Select “ON” if you want to enable this function.