Asus PG348 - Page 23

3-5ASUS PG348Q Series LCD Monitor
• OSDPosition: Adjusts the horizontal position (H-Position)/the vertical
position (V-Position) of the OSD.
• Transparency: Adjusts the OSD background from opaque to transparent.
• OSDTimeout: Adjusts the OSD timeout from 10 to 120 seconds.
• Keylock: To disable all function keys. Press
over 5 seconds to cancel
the key lock function.
• Information: Shows the monitor information.
• LIGHTINMOTION: Selects the brightness level of the light on the stand.
The adjusting ranging range is from Level 0 to 3.
• Sound:
* Volume: the adjusting range is from 0 to 100.
* Mute: toggles the monitor sound between on and off.
• AllReset: “Yes” allows you to restore the default settings.
• DisplayPortDeepSleep: puts the DisplayPort port into deep sleep.
• HDMIDeepSleep: puts the HDMI port into deep sleep.
If the monitor cannot wake up after going into deep sleep, do one of the
followings:
- Press any button (except ) on the monitor to wake it up.
- Disable the Deep Sleep function. (Recommended)