Asus PG35VQ - Page 11

11
4．Remove Middle
Frame from panel
5. Disassemble Sensor
Board & Thermometer
Board from panel and
pull off the FFC from
Bord.
7
1. Unlock the 4 PCBA
screws on Shielding
Screw: #SCRW PH
INT/TOO M3*9TP-S C-
ZN)
2. Take off LVDS FFC
from Main Board
3. Take off the wire
from Main Board and
Transmitter Board
4. Remove Main Board
from Shielding
5. Unlock the 2 screws
on Shielding
Screw: SCRW TAP FPH
M3*4L(6/0.8) NI)
6. Disassemble
Transmitter Board
from Shielding
Screw
driver
MAIN BOARD