Asus PG35VQ - Assembly SOP

13
3.2 Assembly SOP
Preparation before assemble
1. Clean the room for work
2. Identify the area for material
3. Prepare the implement, equipment and materials as bellow:
1) Working table
2) Screw-driver
3) Glove
4) Cleaning cloth
5) ESD protection
After unplugging the power cord, the power Board still have power energe. Please pay
attention when disassembling/assembling.
No.
Picture
Operation
Tool
Note
1
1. Lock the 4 screws with
G-Sync Module on
Main Board
Screw : SCRW M FPH
W/SP M2.5*4.0L ZN
2. Assemble the Mylar to
G-Sync Module
Screw
Driver
MAIN BOARD
MAIN BOARD