Asus PG35VQ - Page 15

15
2
1. Insert the FFC wire to
the Board, then Stick
the Board to panel
2. Insert LENS FFC to the
Board and Insert
SENSOR FFC to the
Board
3. Assemble Middle
Frame to panel and
Clock 13 screws on
Middle Frame
Screw: #SCRW MACH
FLATM3*0.5P*4.5L ZN)
4. Assemble DECO to
Middle Frame
5. Lock 7 screws on
DECO
Screw: #SCRW TP-B FPH
M2*4L B-ZN)
6. Stick the tape to panel
Screw
Driver