Asus PG35VQ - Page 19

19
4
1. Insert the Key Board
wires to control Board
Assemble control Board
to Holder
2. Connect wire in LED
Board.
3. Assemble control holder
to rear cover
4. Lock 2 screws
Screw :SCRW TAP FH
M3*8L B-ZN)
5. Stick the tape on the
Rear Case
6. Insert LED wire to LED
Board, Assemble LED
Board to Rear Case,
Stick the LEE wire on
Rear Case with tapes.
Screw
drive