PN Series 41
Installing a wireless card
NOTE: Your Mini PC includes an M.2 slot for 2230 wireless and Bluetooth
modules. Refer to https://www.asus.com for a list of compatible wireless and
Bluetooth modules.
1. (optional) Remove the M.2 SSD if an M.2 SSD is installed. To remove the M.2
SSD, remove the screw from the stando, then remove the M.2 SSD.
2. Align and insert the wireless card into its slot inside the Mini PC.
3. Gently push down the wireless card on top of the stando and fasten it
using the previously removed screw.
4. (optional) Connect the antennas to your wireless card.
5. (optional) Organize your antenna cables with the cable holder clips.
NOTE:
• Connecting antennas to your wireless card may strengthen the wireless
signal.
• A soft clicking sound indicates that the antenna has been securely attached
to the wireless card.
To Next Page
Loading...
