1-1
1
PRIME B660-PLUS D4
Product Introduction
1.1 Before you proceed
Take note of the following precautions before you install motherboard components or change
any motherboard settings.
• Unplug the power cord from the wall socket before touching any component.
• Before handling components, use a grounded wrist strap or touch a safely grounded
object or a metal object, such as the power supply case, to avoid damaging them due
to static electricity.
• Before you install or remove any component, ensure that the ATX power supply is
switched off or the power cord is detached from the power supply. Failure to do so
may cause severe damage to the motherboard, peripherals, or components.
Unplug the power cord before installing or removing the motherboard. Failure to do so can
cause you physical injury and damage motherboard components.
The pin denitions in this chapter are for reference only. The pin names depend on the
location of the header/jumper/connector.
1.2 Motherboard overview
Place this
side towards
the rear of the
chassis
CPU
DRAM
VGA
BOOT
DDR4 DIMM_B1 (64bit, 288-pin module)
LGA1700
DDR4 DIMM_B2 (64bit, 288-pin module)
DDR4 DIMM_A1 (64bit, 288-pin module)
DDR4 DIMM_A2 (64bit, 288-pin module)
DIGI+
VRM
ASM
1074
SATA6G_4SATA6G_3
CPU_FANAIO_PUMP
COM
M.2(WIFI)
RGB_HEADER2
CHA_FAN1
CHA_FAN3
CHA_FAN2
ADD_GEN2_3
AURA
PANEL
AAFP
COM_DEBUG
CLRTC
RGB_HEADER1
ADD_GEN2_1
ADD_GEN2_2
U32G1_E3
128Mb
BIOS
SATA6G_1SATA6G_2
ATX_12V
ATX_PWR
U32G1_E12
Intel
®
B660
BATTERY
Super
I/O
PCIEX1(G3)_1
PCIEX1(G3)_2
228022602242
2230
M.2_2(SOCKET3)
M.2_3(SOCKET3)
M.2_1(SOCKET3)
228022110 2260 2242
22802260
2242
PCIEX16(G4)
PCIEX16(G3)
USB_56 USB_11E4
TB_HEADER
TPM
SPDIF_OUT
HDMI
DP
USB_78
24.4cm(9.6in)
30.5cm(12in)
AUDIO
LAN_U32G2_34
M.2_1(SOCKET3)
PCIE
SATA
4.0 X4 X
PCIE SATA
Optane Memory
4.0 X4 X V
M.2_2(SOCKET3)
PCIE
SATA
4.0 X2 X
M.2_3(SOCKET3)
RTL
Ethernet
Audio
Codec
VGA
U32G2x2_C1
U32G1_9
9
11
8
7
20
6
4
16
5
12
11
3
5 216 21
3
4
To Next Page
Loading...
