1-1
1
PRIME B660M-K D4
Product Introduction
1.1 Before you proceed
Take note of the following precautions before you install motherboard components or change
any motherboard settings.
• Unplug the power cord from the wall socket before touching any component.
• Before handling components, use a grounded wrist strap or touch a safely grounded
object or a metal object, such as the power supply case, to avoid damaging them due
to static electricity.
• Before you install or remove any component, ensure that the ATX power supply is
switched off or the power cord is detached from the power supply. Failure to do so
may cause severe damage to the motherboard, peripherals, or components.
Unplug the power cord before installing or removing the motherboard. Failure to do so can
cause you physical injury and damage motherboard components.
The pin denitions in this chapter are for reference only. The pin names depend on the
location of the header/jumper/connector.
1.2 Motherboard overview
Place this
side towards
the rear of the
chassis
DDR4 DIMM_A1 (64bit, 288-pin module)
DDR4 DIMM_B1 (64bit, 288-pin module)
CPU_FAN
DIGI+
VRM
RGB_HEADER
CHA_FAN
F_PANEL
SPDIF_OUT
COM_DEBUG
SATA6G_1
CLRTC
TPM
SATA6G_2
SATA6G_3
SATA6G_4
128Mb
BIOS
ATX_12V
ATX_PWR
U32G1_12
BATTERY
HDMI
KBMS_USB_56
VGA
LAN_U32G1_34
U32G1_910
Audio
Codec
Super
I/O
PCIEX1_1
PCIEX1_2
M.2_2(SOCKET3)
M.2_1(SOCKET3)
2280 2260 2242
2242 2260
LGA1700
2280
PCIEX16
USB_1114USB_78
AAFP
24.4cm(9.6in)
COM
AUDIO
M.2_2(SOCKET3)
PCIE
SATA
Optane Memory
4.0 X4 VX
M.2_1(SOCKET3)
PCIE
SATA
4.0 X4 X
SPEAKER
Intel
®
B660
Ethernet
21.1cm(8.3in)
7
6
5
8
141112
3
5 1 26 4
17159 1013 16 7
4