Asus Q170M2 - Memory Configuration; Pch Configuration; Pci Express Configuration; Pch Storage Configuration

ASUS Q170M2 2‑31
DMI/OPI Conguration
Allows you to control various DMI/OPI functions.
DMI Max Link Speed [Auto]
Allows you to set the DMI speed. Conguration options: [Auto] [Gen1] [Gen2] [Gen3]
PEG Port Conguration
Allows you to congure the PEG Port settings.
PCIEX16_1 Link Speed [Auto]
Allows you to congure the PCIEX16_1 speed. Conguration options: [Auto] [Gen1]
[Gen2] [Gen3]
PCIEX16_2 Link Speed [Auto]
Allows you to congure the PCIEX16_1 speed. Conguration options: [Auto] [Gen1]
[Gen2] [Gen3]
Memory Conguration
Memory Remap [Enabled]
Allows you to enable or disable remapping the memory above 4GB. Conguration
options: [Disabled] [Enabled]
PCH Conguration
DeepSx Power Policies [Disabled]
Allows you to congure the DeepSx Mode. Conguration options: [Disabled] [Enabled in
S4‑S5]
PCI Express Conguration
PCIe Speed [Auto]
Allows you to congure the PCIe speed. Conguration options: [Auto] [Gen1] [Gen2]
PCH Storage Conguration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The
SATA Port items show Empty if no SATA device is installed to the corresponding SATA port.
Hyper Kit Mode [Disabled]
Disables this option for M.2 devices. Enables this option for ASUS Hyper Kit card.
Conguration options: [Disabled] [Enabled]
SATA Controller(s) [Enabled]
Enables or disables onboard the SATA device. Conguration options: [Disabled] [Enabled]
The following items appear only when you set SATA Controller(s) to [Enabled].