3-13
ASUS LCD Monitor PG Series
3.3 USB Update FW SOP
1. Decompress ‘RealtekISPTool_For_RTD2718Q_Setup_
V0.0.0.2_20191022.rar’ tool.
2. Key in password ‘vli’ during decompression.
3. Install the RealtekISPTool.
4. Turn on monitor, then use USB3.0 Cable connect monitor USB Port and
PC USB3.0 Port.
5. Open RealtekISPTool, then click ‘Open File’ to choose the new FW from
your device, at last click ‘FW Update’.
6.AfternishFWupdate,disconnectUSBCablefrommonitorandPC.
To Next Page
Loading...
