Asus ROG STRIX B365-G GAMING - Onboard Jumpers

ROG STRIX B365-G GAMING
1-9
Chapter 1
1.1.6 Onboard jumpers
1. Clear RTC RAM jumper
TheClearRTCRAMjumperallowsyoutocleartheRealTimeClock(RTC)RAM
intheCMOS,whichcontainsthedate,time,systempasswords,andsystemsetup
parameters.
ToerasetheRTCRAM:
1. TurnOFFthecomputerandunplugthepowercord.
2. Short-circuit pin 1-2 with a metal object or jumper cap for about 5-10 seconds.
3. PlugthepowercordandturnONthecomputer.
4. Holddownthe<Del>keyduringthebootprocessandenterBIOSsetupto
re-enter data.
DONOTshort-circuitthepinsexceptwhenclearingtheRTCRAM.Short-circuitingor
placing a jumper cap will cause system boot failure!
Ifthestepsabovedonothelp,removetheonboardbuttoncellbatteryandmovethe
jumperagaintocleartheCMOSRTCRAMdata.AfterclearingtheCMOS,reinstallthe
button cell battery.