Asus ROG STRIX X399-E GAMING - Creating a RAID Driver Disk; Creating a RAID Driver Disk in Windows

ROG STRIX X399-E GAMING
4-3
Chapter 4
4. When return to the RAIDXpert2 Conguration Utility menu, select the Array Size and
other detailed policies, press <Enter>. Save changes when nish.
You can specify the array size to be created. Choosing the value 0 will set the maximum
supported array size when a valid conguration is selected.
Deleting a RAID set
Be cautious when deleting a RAID set. You will lose all data on the hard disk drives when
you delete a RAID set.
To delete a RAID set:
1. Select RAIDXpert2 Configuration Utility > Delete Array and press <Enter>. Select
the Array you want to delete and select Delete Array, press <Enter>.
2. Select On to conrm your choice and then select Yes to delete the RAID Array and
return to the RAIDXpert2 Configuration Utility menu, or select No to cancel.
4.2 Creating a RAID driver disk
4.2.1 Creating a RAID driver disk in Windows
®
To install the RAID driver for Windows
®
OS:
1. During the OS installation, click Load Driver to allow you to select the installation
media containing the RAID driver.
2. Insert the supported USB ash drive with RAID driver into the USB port, and then click
Browse.
3. Click the name of the device you’ve inserted, go to Drivers > RAID, and then select
the RAID Bottom drivers rst and click OK, then select the RAID driver for the
corresponding OS version, clik OK.
4. Follow the succeeding screen instructions to complete the installation.
To set up a Windows
®
UEFI operating system under RAID mode, ensure to load the UEFI
driver for your optical drive.