Asus ROG STRIX X570-I GAMING - Clear CMOS Jumper Functionality

ROG STRIX X570-I GAMING
1-9
Chapter 1
1. Clear RTC RAM jumper
TheClearRTCRAMjumperallowsyoutocleartheRealTimeClock(RTC)RAM
intheCMOS,whichcontainsthedate,time,systempasswords,andsystemsetup
parameters.
ToerasetheRTCRAM:
1. TurnOFFthecomputerandunplugthepowercord.
2. Short-circuitpin1-2withametalobjectorjumpercapforabout5-10seconds.
3. PlugthepowercordandturnONthecomputer.
4. Holddownthe<Del>keyduringthebootprocessandenterBIOSsetupto
re-enterdata.
DONOTshort-circuitthepinsexceptwhenclearingtheRTCRAM.Short-circuitingor
placingajumpercapwillcausesystembootfailure!
Ifthestepsabovedonothelp,removetheonboardbuttoncellbatteryandmovethe
jumperagaintocleartheCMOSRTCRAMdata.AfterclearingtheCMOS,reinstallthe
buttoncellbattery.
1.1.6 Jumper