2-6
Chapter 2: Basic Installation
Chapter 2
2.1.4 M.2 installation
Supported M.2 type varies per motherboard.
• The illustrations only show the installation steps for a single M.2 slot, the steps are
the same for the other M.2 slots if you wish to install an M.2 to another M.2 slot.
• Use a Phillips screwdriver when removing or installing the screws or screw stands
mentioned in this section.
• The M.2 is purchased separately.
For M.2_1
When installing an M.2 Type 2242, 2260, 2280 M.2 to M.2_1, you may need to use the
removable screw stand.
1. Remove the screws from the heatsink.
2. Remove the heatsink
1
1
2
E18208_ROG_STRIX_Z590-A_GAMING_UM_V3.indb 6E18208_ROG_STRIX_Z590-A_GAMING_UM_V3.indb 6 3/17/2021 9:53:13 AM3/17/2021 9:53:13 AM
To Next Page
Loading...
