Asus ROG STRIX Z590-A GAMING Series - Page 52

2-12
Chapter 2: Basic Installation
Chapter 2
• To install an M.2 using the removable M.2 Q-Latch screw
For M.2_2: Type 2242, 2260, 2280 M.2
For M.2_3: Type 2242, 2260, 2280 M.2
A. (optional) Remove the M.2 rubber pad.
Follow this step only if you wish to install an M.2 to type 2242.
B. (optional) If required, remove the pre-installed removable M.2 Q-Latch screw
at the 2280 length screw hole.
C. Install the M.2 Q-Latch to the M.2 length screw hole you wish to install your
M.2 to.
D. Rotate and adjust the M.2 Q-latch so that the handle points away from the
M.2 slot.
E. Install your M.2 to the M.2 slot.
F. Rotate the M.2 Q-Latch clockwise to secure the M.2 in place.
E18208_ROG_STRIX_Z590-A_GAMING_UM_V3.indb 12E18208_ROG_STRIX_Z590-A_GAMING_UM_V3.indb 12 3/17/2021 9:53:14 AM3/17/2021 9:53:14 AM