3-14
ROG Swift OLED PG34WCDM Gaming Monitor
• When the pixel cleaning is activated, the monitor will be
unavailable for around six minutes. Would you like to execute
the Pixel cleaning?
Yes / No
• Pixel Cleaning Reminder: Sets a reminder for user to
perform the Pixel Cleaning.
• To prevent and reduce the occurrence of image retention,
please execute pixel cleaning and do not unplug the monitor
before the process of pixel cleaning function.
• Screen Move: Selects the screen movement level to
prevent image sticking on the display panel.
• Auto Logo Brightness: Enable this function to allow the
system to automatically adjust the logo brightness to
correct the potential picture quality issues.
• The screen may have mura and image sticking due to OLED
characteristic during the initial use or re-used after a long
time. It is advised to perform Pixel Cleaning while turning on
monitor to make sure situation disappear.
• DisplayPort Stream: Selects DisplayPort 1.2 or DisplayPort 1.4
according to the graphic card DP version.
• DSC Support: Enables or disables the DSC (Display Stream
Compression) support.
• Information: Displays the monitor information.
• All Reset: Select YES to revert all settings to the factory default mode.