7
1.3 Your wireless router
1
Power LED
O: No power.
On: Device is ready.
Flashing slow: Rescue mode
Flashing quick: WPS is processing.
2
LAN 1~4 LEDs
O: No power or no physical connection.
On: Has physical connection to a local area network (LAN).
3
WAN (Internet) LED
O: No power or no physical connection.
On: Has physical connection to a wide area network (WAN).
4
2.4GHz LED / 5GHz LED
O: No 2.4 GHz or 5 GHz signal.
On: Wireless system is ready.
Flashing: Transmitting or receiving data via wireless connection.
5
USB LED
O: No power or no physical connection.
On: Has physical connection to USB device.
6
Power (DC-IN) port
Insert the bundled AC adapter into this port and connect your router to a power source.
7
Power button
Press this button to power on or off the system.
To Next Page
Loading...
