7
1.3 Your wireless router
WPS LED
O: WPS is not processing.
Flashing quick: WPS is processing.
USB 3.0/2.0 LED
O: No power or no physical connection.
On: Has physical connection to USB device.
LAN 1~4 LED
O: No power or no physical connection.
On: Has physical connection to a local area network (LAN).
WAN (Internet) LED
On: Has physical connection to a wide area network (WAN).
Red light on: No IP address or in the rescue mode.
2.4GHz LED / 5GHz LED
O: No 2.4GHz or 5GHz signal.
On: Wireless system is ready.
Flashing: Transmitting or receiving data via wireless connection.
Power LED
O: No power.
On: Device is powered on.
Flashing slow: Rescue mode
To Next Page
Loading...
