Asus RT-N300 B1 Quick Start Guide

Unplug
Check the WAN and 2.4G LED lights
to ensure the hardware connection is
ready (see the picture above).
Quick Start Guide
Fast. Easy. Setup!
RT-N300 B1
1
2
3
Prepare your Modem Power on your Router
Login and Connect
Open a web browser.
You will be redirected
to the ASUS Setup Wizard. If not, navigate to
http://router.asus.com
Login using ‘admin’
as both user name and
password. Follow the wizard to complete
setup. Then you’re connected! (For more
help please refer to the user manual).
Connect your
modem
to the
router with the
network cable
provided.
Power on your
cable/DSL modem.
Check your
cable/
DSL modem
LED
lights
to ensure the
connection is active.
If you are using DSL for internet, you will need your username/password from your Internet service
provider (ISP) to properly configure your router.
Unplug your cable/
DSL modem
. If it
has a battery backup,
remove the battery.
Security
We recommend changing your password for increased
security. Reboot the router after changing default
settings.
Router
2.4 GHz
Login Name
Network Name(SSID)
Password
Password
SIGN IN
admin
admin
Sign in
Plug in the power
adapter.
LANWAN2.4GHzPower
Connect your PC
to the router via Wi-Fi or using an additional
network cable (not included).
CA11802_RT-N300_B1_QSG_sticker.indd 1 08/10/16 13:37

Asus RT-N300 B1 Specifications

General

Frequency Band	2.4 GHz
Data Rate	Up to 300 Mbps
Antenna Gain	5 dBi
LAN Ports	4 x 10/100 Mbps
WAN Ports	1 x 10/100 Mbps
Wireless Standard	IEEE 802.11n
Antenna	2 x 5 dBi external antennas
Security	WPA, WPA2, WEP
Firewall	SPI Firewall